Vmac G30+Gen - 25 CFM Rotory Screw Air Compressor w/ Generator, G300005 (Free Shipping)
SKU:
$6,387.00
$6,387.00
per item
- Air Compressor SpecsUp to 25 CFM, 100% duty cycle, up to 150 psi, VMAC oil-injected rotary screw, belt driven.
- 2-speed throttle, Automatically idles down/up with air demand
- Compressor thermal protection circuit
- Automatic rapid blow-down valve on tank
- 200psi pressure relief valve
- Generator Specs3600 W continuous AC output
- 1 x 20A, 120V, 60Hz single-phase circuit with GFCI duplex receptacle
- 1 x 20A, 240V, 60Hz single-phase circuit with L14-20 twist lock
- Single-phase brushed synchronous 2 pole generator with electronic automatic voltage regulation (AVR); helps protect sensitive electronics
- Other InfoHonda GX390 air cooled 4-stroke OHV with electric start, EPA and CARB compliant, Honda approved application.
- Electronic key switch with hour meter
- Approximately 295 lbs (93 kg)
- Low engine oil pressure shutoff
- 81 decibels at 20ft at high idle; 67 decibels at low idle
- Integrated Battery ACDelco 12 V, 300 CCA, 360 CA and Electric Start
- Unloader unloads compressor for generator operation; decreases engine load, lowers sound levels, reduces fuel use and engine wear
- 2-speed throttle control with manual valve for Compressor Mode (Auto Idle) and Generator Mode (High Idle)
Estimated lead time 2 - 4 weeks + shipping time
Free shipping to any commercial address in the contiguous US!
*Not available for shipping to CA. due to CARB compliancy
25 CFM CONTINUOUS AIR POWER
VMAC’s G30 air compressor/generator includes a patented 25 CFM rotary screw air compressor designed to maintain max CFM 100% of the time, so operators don’t have to wait for their air compressor to fill up a large air receiver tank. This maximizes air tool performance while providing maximum operator efficiency at the job site and eliminating downtime.
3600 W CONTINUOUS AC GENERATOR
The G30 air compressor/generator is engineered and manufactured for mobile power. The 3600 W continuous AC output generator includes a 120V circuit with a GFCI duplex receptacle and a 240V circuit with a L14-20 twist lock. Operators will be able to power their electric tools, lighting, and other equipment wherever needed.
TURNKEY SYSTEM WITH EASY INSTALLATION
The G30 air compressor/generator is easy to install and ready for same-day use. The system includes all the necessary accessories, including a battery, electric starter, and lifting hook; simply add fuel and get straight to work.
TWO OPERATING MODES
VMAC’s air compressor/generator features a high idle and auto idle setting, ensuring the system’s optimal performance for every task. A simple throttle control valve makes it easy to switch between high idle mode for generator use and auto idle mode for air on demand.
40% SMALLER & 36% LIGHTER
VMAC G30 air compressor/generators are engineered and manufactured for mobile applications. The G30 is 40% smaller and 36% lighter than other gas powered air compressor/generator combos on the market today.
VMAC’s G30 air compressor/generator includes a patented 25 CFM rotary screw air compressor designed to maintain max CFM 100% of the time, so operators don’t have to wait for their air compressor to fill up a large air receiver tank. This maximizes air tool performance while providing maximum operator efficiency at the job site and eliminating downtime.
3600 W CONTINUOUS AC GENERATOR
The G30 air compressor/generator is engineered and manufactured for mobile power. The 3600 W continuous AC output generator includes a 120V circuit with a GFCI duplex receptacle and a 240V circuit with a L14-20 twist lock. Operators will be able to power their electric tools, lighting, and other equipment wherever needed.
TURNKEY SYSTEM WITH EASY INSTALLATION
The G30 air compressor/generator is easy to install and ready for same-day use. The system includes all the necessary accessories, including a battery, electric starter, and lifting hook; simply add fuel and get straight to work.
TWO OPERATING MODES
VMAC’s air compressor/generator features a high idle and auto idle setting, ensuring the system’s optimal performance for every task. A simple throttle control valve makes it easy to switch between high idle mode for generator use and auto idle mode for air on demand.
40% SMALLER & 36% LIGHTER
VMAC G30 air compressor/generators are engineered and manufactured for mobile applications. The G30 is 40% smaller and 36% lighter than other gas powered air compressor/generator combos on the market today.
|
Product Brochure
|
Bid Specifications
|
Vmac G300005 Manual
|
