Vanair Reliant™ RS85-L - 85 CFM Rotary Screw Aluminum Hydraulically Driven (Free Shipping!)
SKU:
$10,680.00
$10,680.00 - $11,534.00
per item
- 60-85 CFM and Up to 150 PSI
- 12V Electrical System
- Manufacturer Lifetime Warranty on Air End
- Made in the USA
- Conveniently located and easy to read pressure, hour, and temperature gauges
- 4 week manufacturing lead time
Free Shipping to any commercial address in the contiguous US!
Now 30% Lighter Than its Predecessor. More Powerful Than the Competition. Quieter Operation.
The Reliant™ RS85-L provides a whopping 85 CFM of air power at almost half the weight of its predecessor. Enough power, in fact, to operate a 90 lb. jack hammer or 4” piercing tool or 1-1/2 inch impact wrench or assist in air gouging. No other brand of hydraulic driven abovedeck systems can even come close. The RS85-L is designed with an aluminum air end and canopy to reduce weight and to protect against rust. Its compact footprint increases deck space on your truck, and its sound attenuation design decreases noise levels for comfortable operation.
Compressor Dimensions with fittings (In.) – 38.55L X 21.0W X 24.64H
Dimension listed is not a complete representation of total space necessary. Please consult Pafco for overall space and air requirements.
Dry Weight (Lbs.) – 285
* Ratings are approximate and are based on 120 ˚F hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Pafco for specific details. **85 CFM @ 150 PSI systems may require additional cooling.
Dimension listed is not a complete representation of total space necessary. Please consult Pafco for overall space and air requirements.
Dry Weight (Lbs.) – 285
* Ratings are approximate and are based on 120 ˚F hydraulic fluid temperature. Add 400 PSI minimum to hydraulic requirements for hydraulic system continuous pressure ratings. Consult Pafco for specific details. **85 CFM @ 150 PSI systems may require additional cooling.
Performance
- 60-85 CFM and up to 150 PSI
- Ambient Operating Range of -20°F to +125°F
- Lightweight
- Six-Pin Weatherproof Electrical Connection
- Hydraulic Cooling Assist for Additional Hydraulic Systems
- 12V DC Model Available
- Open Center or Closed Center Hydraulic Manifold Block
Encapsulated Air Compressor
- Direct-Driven Aluminum Encapsulated Rotary Screw Air End
- Bolt-On Inlet Valve
- Integral Air-to-Oil Separator Tank
- Manufacturer Lifetime Warranty on Air End
- Made in the USA
Air-to-Oil Cooler
- Capable of Cooling Up to 150 PSI
- Ambient Operating Range of -20 ˚F to + 125 ˚F
Hydraulic Cooler
- Integrated Cooler Reduces Heat in Truck Hydraulic System
Hydraulics
- Gear-Type Motor
- Hydraulic Oil In – 3/4” 37 Degree JIC (#12)
- Hydraulic Oil Out - 1” 37 Degree JIC (#16)
- Open Center or Closed Center
- Hydraulic Case Drain - 3/8” 37 Degree JIC (#6)
- Hydraulic Load Sense Line - 1/4” 37 Degree JIC (#4)*
Instrumentation Standard
- Conveniently Located and Easy to Read Temperature, Hour, and Pressure Gauges
- Relocatable
Safety equipment
- Air Pressure Relief Safety Valve
- Open Center Hydraulic Oil Pressure Relief Valve
- Automatic Blow-Down on Shutdown
- High-Temperature and High-Pressure Shutdown
- Vented Fill Cap
Servicability/Convenience
- Reversible Hinged Hood
- Access Panel for Easy Accessibility for Oil Changes
- JIC Fittings on Front of Machine for Hydraulic and Air Connections for Convenience
Canopy
- Lightweight Powder-Coated Aluminum Sheet Metal Enclosure
- Single Point Lifting Bail
Cold Weather Package (Optional)
- Integrated System with Hydraulic Thermal Valve
Product Brochure
|
Bid Specifications
|
Hydraulically
|
Vanair Warranty
|
