Here is a job we recently finished up with a service body, and some personalized options that the customer requested. This bed has a spray-in liner, strobe system, and chip guards to name a few. 

Standard shelving is supplied in all the compartments, and a C-Tech drawer unit was installed for quality mobile storage.

A headache rack was fabricated to protect the back windshield and secure the overhead strobe light. Placed directly behind the cab is diamond plate aluminum for chip guards. We also installed aluminum treadplate on the top of the side packs which protects against scratching or dents, and provides a convenient place to work or set your tools.

This hitch/ bumper combination was fabricated and painted in house. It provides a convenient step into the back of the body, and includes a 2-1/2" receiver, pintle hitch, and D-rings.  

A complete view of the finished bed. 

​Thanks for checking out the post! 

These are a couple of custom service trucks we recently worked on. The large front compartments offer additional storage space for taller items. 

The bed is outfitted with a bed liner, recessed d-rings, and LED worklights. We also fabricated an aluminum headache rack and mounted it to the bed to protect the truck from anything that might be loose in the bed and to tie it together aesthetically. 

The driver side compartments on both trucks received C-Tech drawer units. These units lead the industry in mobile mounted drawer units, and their vibration tested ball bearings exceed expectations. An inverter was installed to provide easy power access. The passenger side rear compartment opens up to a hose reel and a air filter regulator lubricator which filters the air, has the ability to adjust air pressure, and lubricates air tools. The air is provided from the front of the vehicle where we installed a VMAC Underhood air compressor. The last photo shows a latchmatic system which locks and unlocks all the compartments simultaneously from a simple key fob. 

A final view of the completed truck. 

​Thanks for checking out the post!

Here is a new job we recently finished up. This is a Reading high-side body mounted on a Chevy 6500. The high-side body is a great option for increasing storage significantly compared to a regular service body.

Floor and sides, tailgate, and bumper got a liner for protection against wear and tear. A standard hitch was added to accommodate  the body.

Shelving is available in all the compartments, and a C-Tech drawer unit was added for quality storage.

A complete view of the body with all compartments. 

Thanks for checking out the post!

Here is a job we recently finished up. Offering plenty of storage space, the Reading high side makes for an efficient, versatile option. 

A locking roll cover provides safe, weather resistant storage for the larger items needed on the job. 

Fabricated here at Pafco, both the rock guards and custom welded bumper add a professional quality to the truck.  

We also added a shelf for a small C-Tech drawer unit.

A final view of the completed truck. 

​Thanks for checking out the post!

This truck was needed as a service truck for a fire department. We installed the service body, a roll cover, some added storage solutions, and more. 

The locking roll cover slides on rails and is specifically made for the service body. It is a hard cover that protects well from the elements. 

Multiple storage solutions were added to the service body, including C-Tech drawer units, RC toolboxes, and LED strip lighting inside the service body compartments. The C-Tech drawer units use vibration tested ball bearings and slides, making them the ideal drawer unit for on-road application. RC toolboxes are a simple and heavy duty storage option.

After decals and strobes. 

​Thanks for checking out the post!

Here is a clean looking job we finished up! This 8 ft Reading service body has a removable crossbar ladder rack, a drawer unit, and some added lighting. 

The truck has fully lighted cabinets with a Reading LED light kit. We also installed front and rear strobes and a 1,000 Watt inverter on the driver side. 

Spray lining the bed and bumper is a nice touch that keeps the paint from becoming scratched and rusty. We added a diamond plate scratch guard to keep the corner of the body in pristine condition. The recessed D-rings make tie-downs as easy as ever while keeping the bottom of the bed flat for larger items. 

The vibration tested C-Tech drawer unit has ball bearings made for the road, making them a great option for service bodies. This service body includes a Latchmatic lock system with key fobs for simple safekeeping. 

A hitch and mud flaps were added as well. 

A full view of the finished truck!

Thanks for checking out the post!

This customer needed a lot of storage which the Reading high side body accommodates. 

We installed E-track and a metal mesh window cover for safe transport of items. The entire cargo area has been spray lined for added durability. 

Some added LED lighting and treadplate scratch guard to keep the truck looking fresh! 

The step on the back is an added feature on the high side service body that makes for extra storage, a great work surface, and a place to mount a vise. The step has been spray lined to protect from scratching and abuse. 

A complete view of the spray lined bed including recessed tie down D-rings. 

Road vibration tested C-tech drawer units were added for organized tool space. 

Thanks for checking out the post!

Here are some really neat trucks that we finished up. These are Reading Custom Enclosed Service Bodies and Western Mule Crane (bumper storage) mounted on Freightliner M2 Chassis. These bodies have and abundance of tool and equipment space!

Here is a closer front/side view of one of the completed trucks.

The driver's side has 2 C-tech drawer units installed in the 2nd and 3rd compartments. These are mostly used for tools and small parts and really help keep things organized!  

It's hard to show the amount of space available in this enclosed body! The entire body is powder coated in and out providing a durable paint finished even for the storage areas. 

We installed a Western Mule Bumper Crane on the rear of the body. This crane assembly is welded into the rear frame of the truck chassis and has a fold out crane(on the right), vise mount(the on left), and center fold down step. The crane has an electric hoist and is manual side to side. Everything folds up neatly into the bumper!

The rear of the body has access doors for the customer's air hoses and fuel reels. In addition, we installed 4-corner LED flasher systems, LED work lights on the passenger side, and aftermarket backup cameras on the rear above the doors. 

 We would love to hear from you on any truck projects you want to make happen! ​Thanks for checking out the post!

This is a 8ft Reading service body we recently upfitted on a Chevy 3500 pickup bed delete. We also fabricated a ladder rack and a vise mount to finish the job out. It really turned out well! 

Here is a view of the driver's side front with aluminum diamond plate installed full height. Dual wheel bodies are wider than the cab of the truck and having full height protection from road debris keeps the body looking nice much longer.

Here are a couple pictures of our rear vise mount. This heavy duty mount is reinforced to the bumper with a backing plate for added support. We are now offering this item on our online store!  Click below to view. 

Thanks for checking out the post! If you have any truck upfitting questions feel free to reach out!

Here is an up-fit that we finished up recently. We paint matched, mounted, and up-fitted  this Reading Master Mechanics body on a Ram 5500 Diesel.  The job really turned out nice!

Here is a view of the passenger side showing the open compartment space. The front compartments are vented to accommodate for gas bottle storage.

Here is a view of the rear of the truck and the work bench bumper. All the horizontal surfaces and entire cargo area are spray-lined for added durability.  

The driver's side has 3 drawer units mounted in 3 compartments. These heavy duty, built in modules have 300lbs slides per drawer and very handy in storing tools and supplies. 

Here are couple closeups of the 4 corner LED work light system which run to a switch in the cab and the rear bumper which has storage space inside. 

Thanks again for checking out the post!