Vmac G30+Gen - 25 CFM Rotory Screw Air Compressor w/ Generator, G300005 (Free Shipping)+ Limited Vmac G30 Service Kit Offer

SKU:
$6,812.00
$6,812.00
Unavailable
per item
  • Air Compressor Specs: Up to 25 CFM, 100% duty cycle, up to 150 psi, VMAC oil-injected rotary screw, belt driven.
  • 2-speed throttle, Automatically idles down/up with air demand
  • Compressor thermal protection circuit
  • Automatic rapid blow-down valve on tank
  • 200psi pressure relief valve
  • Generator Specs 3600 W continuous AC output
  • 1 x 20A, 120V, 60Hz single-phase circuit with GFCI duplex receptacle
  • 1 x 20A, 240V, 60Hz single-phase circuit with L14-20 twist lock
  • Single-phase brushed synchronous 2 pole generator with electronic automatic voltage regulation (AVR); helps protect sensitive electronics
  • Other Info: Honda GX390 air cooled 4-stroke OHV with electric start, EPA and CARB compliant, Honda approved application.
  • Electronic key switch with hour meter
  • Approximately 295 lbs. (93 kg)
  • Low engine oil pressure shutoff
  • 81 decibels at 20ft at high idle; 67 decibels at low idle
  • Integrated Battery ACDelco 12 V, 300 CCA, 360 CA and Electric Start
  • Unloader unloads compressor for generator operation; decreases engine load, lowers sound levels, reduces fuel use and engine wear
  • 2-speed throttle control with manual valve for Compressor Mode (Auto Idle) and Generator Mode (High Idle)

Estimated lead time 2 - 4 weeks + shipping time

Free shipping to any commercial address in the contiguous US!

​Terms & Conditions

​*Not available for shipping to CA. due to CARB compliancy